Switching seamlessly from static to spinning is now easy with the XPERT Pro; just twist and go!




My floor to ceiling height is:

 '  ''

Extensions needed:
  • No additional extensions needed

£249.99£349.99 incl. VAT

£249.99£349.99 incl. VAT

Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist

Taking the best elements of the XPERT, adding in the most advanced spinning & static mechanism in the world, X-LOCK, plus a minimised, sleeker upper dome, and you have the XPERT Pro.

X-LOCK allows you to switch from static to spinning in an instant and back with just a flick of the wrist, no tools needed.

The XPERT Pro is available in Chrome, Stainless Steel, Brass, Titanium Gold, Powder Coat (Black, Pink & White) and Silicone (45mm diameter only Black & Pink), and in both 40mm & 45mm pole diameters.


  • Pressure mounted pole that fits heights between 2260mm (7′ 4″) to 2755mm (9′)
    • Optional extensions for ceiling heights above 2755mm (9′) up to 3380mm (11′ 1″)
  • Available in Chrome, Brass, Stainless Steel, Titanium Gold, Silicone (45mm only Black & Pink) & Powder Coat (Black, Pink & White) finishes (product colour may differ from pictures) and 40mm & 45mm diameters
  • Easy to install and user friendly
  • X-LOCK spinning & static mechanism
  • Minimised, sleeker upper dome
  • Disassembles quickly for easy storage and transport
    • Carry case sold separately
  • No screws, bolts or drilling needed to set up the XPERT Pro pole
  • Safe, sturdy and full instruction manuals/instructional videos available
    • Can be installed with a permanent mount (Ball Mount or Pole Home Mount)

The XPERT Pro is designed for home use only. For commercial (studio and gym) use, take a look at our Dual-Lined one-piece and multi-piece poles.

Or to upgrade your XPERT pole with X-LOCK, take a look here.


Weight 20 kg

40mm, 45mm


Chrome, Titanium Gold, Brass, Stainless Steel, Powder Coat Pink, Powder Coat Black, Powder Coat White, Silicone Pink, Silicone Black

2-3 Days UK delivery or 3-5 days delivery in the EU

What's the difference between each pole finish?

Chrome – The industry standard finish and a good all-rounder for all levels of skill/experience. High grade steel poles are coated in Chrome and polished to a high finish.

Stainless Steel – A great alternative to Chrome or Brass and very hard wearing. Stainless Steel poles are polished to a mirror finish. Also good for polers with nickel allergies and ideal for commercial environments (studios and gyms) with a lot of polers!

Brass – Great in hotter climates as the grip factor increases with the ambient temperature and the perfect choice for polers with nickel allergies.

Titanium Gold – Chrome poles are taken and electronically coated with the finish for an enhanced grip.

Powder Coat (Black, Pink & White) – Useful for people who struggle to grip standard metal poles. Very high grip factor! Steel poles are powder coated and baked to seal the finish. Available in black, white and hot pink!

Silicone (Black & Pink) – The ultimate easy grip pole! Minimal skin to pole contact needed. Steel poles have a silicone sleeve attached to the surface of the pole. Available in 45mm pole diameter only.

Chrome – 40mm and 45mm – Steel core with Chrome coating applied

Stainless Steel – 40mm and 45mm – Highly polished Stainless Steel pole

Brass – 40mm and 45mm –Brass tube.

Titanium Gold – 40mm and 45mmSteel core with Chrome coating that is then electronically treated to give the Gold finish with additional grip

Powder Coat (Black, White and Pink) – 40mm and 45mm – Steel core with a powder coat layer baked on

Silicone (Black and Pink) – 45mm – Steel core with a 5mm thick silicone sheath glued to the pole

How many people can use an XPERT Pro at once?

A maximum of two people can use a XPERT Pro pole at one time

I have set up the XPERT/XPERT Pro set and the spin is uneven - what is wrong?

Check your manual first! The most common cause for this is the positioning of the ceiling dome and base, see pages 11-13 of your manual. Firstly, the dome must be positioned directly underneath a ceiling joist - with the joist lined up to run down the center of the dome. If the dome is off-center to the joist it will push up on one side when installed and cause an uneven spin.

Secondly, the pole must be completely vertical - so the base must be positioned correctly underneath the dome. Use a spirit level if you are unsure if your pole is straight.

Can I use my pole on slanted ceilings?

If you have slanted, vaulted or cathedral style ceilings you can use our XPERT or XPERT Pro poles. This can be done by purchasing a vaulted ceiling mount.

Unfortunately, SPORT poles do not have this option.

What comes in the XPERT Pro kit?

1 x XPERT Pro A pole, 1x XPERT Pro B pole, 1 x 250mm extension, 1 x Top Insert, 1x 125mm extension, 2 x 200mm X-JOINT (3 x 200mm X-JOINT's in a 40mm pole set), 1 x 180mm X-JOINT, base, upper dome, instruction manual and a 6mm Hex key.

How do I add an extension?


How do I measure my floor to ceiling height?


How do I locate joists?

Joists can be located by either tapping across the ceiling with a knuckle or with an electronic stud finder. With a knuckle you tap across until a more solid sound is heard - this is a joist or beam. A hollow sound is the space between the joists. A stud finder will locate the joist electronically (see what is a stud finder). 

What's the size of the upper dome/base?

SPORT (NS) upper plate = 230mm

SPORT (NS) base plate = 230mm

XPERT (NX) upper dome = 380mm

XPERT (NX) microbase = 120mm

XPERT Pro (PX) upper dome = 280mm

XPERT Pro (PX) base = 120mm

Do you have spare/replacement screws?

Yes, if you should need a replacement screw(s) for any X-POLE product, please contact our technical team on 0044 (0)208 449 4400 or at [email protected] for advice.


A-pole retaining screws – 3 x M8 x 8
Static/Spinning – 2 x M10 x10
Bearing locking screws -  3 x M10 x 8 (Domed)
(NST02 - 3 x M10 x 8 Flat)
Bearing locating 1 x M6 x 5


Adjuster locking screws – 3 x M10 x 8
Static/Spinning – 2 x M10 x 10


Adjuster locking screws – 3 x M10 x 8

Pre-2014 XPERT (XX)

Adjuster locking screws – 3 x M8 x 8
Static/Spinning – 2 x M8 x 10