FAQ & Information

Find out more about us and get any assistance you need

Engineering

What’s the size of the upper dome/base?

SPORT (NS) upper plate = 230mm

SPORT (NS) base plate = 230mm

XPERT (NX) upper dome = 380mm

XPERT (NX) microbase = 120mm

XPERT Pro (PX) upper dome = 280mm

XPERT Pro (PX) base = 120mm

Can I use a home mount in my studio?

No, we advise against this and instead recommend the Ball Mount for studio use

Can I use a trapeze on an A-FRAME?

No, we do not recommend using a Trapeze with the X-POLE A-FRAME

Can I make the A-FRAME wider?

Yes, we produce an extended top bar for the A-FRAME which is 2m long

How many people can use an A-FRAME at once?

A maximum of two people can use an A-FRAME at one time

How many people can use an X-STAGE/X-STAGE Lite at once?

A maximum of two people can use a X-STAGE/X-STAGE Lite pole at one time

How many people can use an XPERT Pro at once?

A maximum of two people can use a XPERT Pro pole at one time

How many people can use an XPERT at once?

A maximum of two people can use a XPERT pole at one time

How many people can use a SPORT at once?

A maximum of two people can use a SPORT pole at one time

What is a competition/dual lined multi-piece pole?

Competition/dual lined multi-piece’s are designed for commercial (studios and gym) usage. They have an inner steel core that adds rigidity and strength at taller heights. They use a 2.5m A pole and a single X-JOINT and dual lined extension to reach your desired height.

How do I put up a competition/dual lined multi-piece pole?

How do I put the extended top insert into the ball mount?

Is the silicone on silicone poles removable?

No, the silicone sheath is glued to the pole.

Do you have spare/replacement screws?

Yes, if you should need a replacement screw(s) for any X-POLE product, please contact our technical team on 0044 (0)208 449 4400 or at technical@x-pole.co.uk for advice.

X-STAGE/X-STAGE Lite (NST03/NST03LT)

A-pole retaining screws – 3 x M8 x 8
Static/Spinning – 2 x M10 x10
Bearing locking screws –  3 x M10 x 8 (Domed)
(NST02 – 3 x M10 x 8 Flat)
Bearing locating 1 x M6 x 5

XPERT (NX)

Adjuster locking screws – 3 x M10 x 8
Static/Spinning – 2 x M10 x 10

XPERT Pro (PX)

Adjuster locking screws – 3 x M10 x 8

Pre-2014 XPERT (XX)

Adjuster locking screws – 3 x M8 x 8
Static/Spinning – 2 x M8 x 10

My X-JOINT is stuck

Ensure that the X-JOINT is fully contracted and then insert a broom handle or similar item in to the pole to dislodge the X-JOINT.

My adjuster is stuck

You may have tightened your adjuster screws onto the adjuster rod thread, causing damage to the thread in the process. We do offer a repair service for this fault. Please contact our technical team for advice on either support@x-pole.co.uk or 00 44 (0)208 449 4400 and select option 3.

What comes in the X-STAGE/X-STAGE Lite kit?

1 x Main Frame Carry Case, 1 x Main Stage Frame, 1 x 4mm, 5mm and 6mm Hex Key, Side Skirts (X-STAGE only), Fixed Wheels (x2), 1 x Pole Case, 1 x X-STAGE A pole,1 x X-STAGE B pole, 1 x Bearing unit, 1 x 250mm X-JOINT, Instruction manual, 6 x stage floor plates and 2 x stage floor plates carry cases.

What comes in the XPERT Pro kit?

1 x XPERT Pro A pole, 1x XPERT Pro B pole, 1 x 250mm extension, 1 x Top Insert, 1x 125mm extension, 2 x 200mm X-JOINT (3 x 200mm X-JOINT’s in a 40mm pole set), 1 x 180mm X-JOINT, base, upper dome, instruction manual and a 6mm Hex key.

What comes in the XPERT kit?

1 x XPERT A pole, 1x XPERT B pole, 1 x 250mm extension, 1 x Top Insert, 1x 125mm extension, 2 x 200mm X-JOINT (3 x 200mm X-JOINT’s in a 40mm pole set), 1 x 180mm X-JOINT, base, upper dome, instruction manual, 5mm Hex Key, 6mm Hex key and a carry/storage cases.

What comes in the SPORT kit?

1 x SPORT A pole, 1x SPORT B pole, 1 x 250mm extension, 1x 125mm extension, foam padding, 2 x 200mm X-JOINT (3 x 200mm X-JOINT’s in a 40mm pole set),1 x 180mm X-JOINT, articulating base, upper plate, instruction manual, Tightening/Releasing Tool, 6mm Hex key and a carry/storage case.

How do I change my X-STAGE from static to spinning?

How do I change my XPERT from static to spinning?

How long will my pole last?

Depending on amount of use and maintenance, your pole can last from 2-5 years.

Can I use my X-STAGE pole without the stage base?

No, the X-STAGE pole set requires the X-STAGE base and bearing carrier to function.

Can I use my SPORT/XPERT/XPERT Pro on my X-STAGE?

No, SPORT, XPERT and XPERT Pro poles are not compatible with the X-STAGE bearing unit.

How can I tell what generation/version my X-STAGE is?

Use the image below to identify which generations/version X-STAGE you have:

How can I tell what generation/version X-JOINT I have?

Pre-2014 X-JOINT’s have a circular keyway pin in the centre of the joint. Post-2014 X-JOINT’s have an oval/pill shaped keyway pin at the centre of the X-JOINT.

Post 2014 X-JOINT
Pre-2014 X-JOINT

How do I add an extension?

How do I know what extensions I need?

You will need to measure from the floor to the ceiling in the place where you intend to use the pole and then review the appropriate height chart for the pole to ascertain what extension you will need to reach your desired height. This video shows you how to measure your floor to ceiling height:

Can I make a SPORT spinning?

No, this is not possible.

Can I change a SPORT to an XPERT?

No, this is not possible.

How can I tell what generation/version my XPERT is?

Please check the shape of the slot inside the A pole. If it is a semi-circle, it is a pre-2014 XPERT. If it is half an oval, it is a post-2014 XPERT.

How can I tell what generation/version my SPORT is?

Please check the shape of the slot inside the A pole. If it is a semi-circle, it is a pre-2014 SPORT. If it half an oval, it is a post-2014 SPORT.

What X-JOINT’s come in the pole sets?

X-POLE sets are supplied with 2 x 200mm and 1 x 180mm X-JOINT’s as standard. Additional X-JOINT’s can be purchased from your local X-POLE office.

Can I adjust the height of the pole on my X-STAGE?

While the X-STAGE pole can not be made taller, it can be made shorter by using an NE extension. Please contact our technical team for advice on either support@x-pole.co.uk or 00 44 (0)208 449 4400 and select option 3.

Do you have parts for XP/Screw together poles?

Unfortunately, we no longer manufacture parts for these products.

Can I use new extensions with my old pole?

Yes. You will need to purchase an adapter X-JOINT which will allow you to use NE extensions on your old pole.

Do you supply screws with your mounts?

Home Mounts are supplied with 4 x 5 x 40mm. Ball mounts do not come with screws.

What screws do I need for my mount?

This will depend on what type of mount you are using and the material you are attaching your mount to. Please contact our technical team for advice on either support@x-pole.co.uk or 00 44 (0)208 449 4400 and select option 3.

What are the product weight limits?

Please speak to our technical team regarding weight limits

How much does an X-FLY weigh?

The X-POLE X-FLY flying pole weighs approximately 18kg

How much does a LyraPole weigh?

The X-POLE LyraPole weighs approximately 15kg

How much does a hoop weigh?

X-POLE hoops weigh approximately 15kg

How much does an A-FRAME weigh?

The X-POLE A-FRAME weighs 35kg

How much does an X-STAGE/X-STAGE Lite weigh?

The X-POLE X-STAGE weighs 100kg. The X-STAGE Lite weighs 75kg.

How much does an XPERT Pro weigh?

The X-POLE XPERT Pro weighs 21kg

How much does an XPERT weigh?

The X-POLE XPERT weighs 21kg

How much does a SPORT weigh?

The X-POLE SPORT weighs 18.5kg

What is an X-JOINT?

What’s the difference between each pole finish?

Chrome – The industry standard finish and a good all-rounder for all levels of skill/experience. High grade steel poles are coated in Chrome and polished to a high finish.

Stainless Steel – A great alternative to Chrome or Brass and very hard wearing. Stainless Steel poles are polished to a mirror finish. Also good for polers with nickel allergies and ideal for commercial environments (studios and gyms) with a lot of polers!

Brass – Great in hotter climates as the grip factor increases with the ambient temperature and the perfect choice for polers with nickel allergies.

Titanium Gold – Chrome poles are taken and electronically coated with the finish for an enhanced grip.

Powder Coat (Black, Pink & White) – Useful for people who struggle to grip standard metal poles. Very high grip factor! Steel poles are powder coated and baked to seal the finish. Available in black, white and hot pink!

Silicone (Black & Pink) – The ultimate easy grip pole! Minimal skin to pole contact needed. Steel poles have a silicone sleeve attached to the surface of the pole. Available in 45mm pole diameter only.

Chrome – 40mm and 45mm – Steel core with Chrome coating applied

Stainless Steel – 40mm and 45mm – Highly polished Stainless Steel pole

Brass – 40mm and 45mm –Brass tube.

Titanium Gold – 40mm and 45mmSteel core with Chrome coating that is then electronically treated to give the Gold finish with additional grip

Powder Coat (Black, White and Pink) – 40mm and 45mm – Steel core with a powder coat layer baked on

Silicone (Black and Pink) – 45mm – Steel core with a 5mm thick silicone sheath glued to the pole

Is the pole portable?

The SPORT, XPERT, XPERT Pro, X-STAGE and X-STAGE Lite are all portable poles.

Sign up to the X-Pole newsletter

Sign up to the X-Pole newsletter

Client 6
Client 5
Client 4
Client 3
Client 2
Client 1
CRTGBRSTPDSN